Nira Pro Laser (2nd Gen) review: A faster, more powerful alternative to LED face masks

Despite what you might have heard, the best LED face masks and skincare gadgets aren’t a myth – I can say that with confidence after testing more than my fair share. What they are, though, is a commitment. These aren’t quick fixes, and they take consistency and a bit of patience before you start seeing real results.

That’s exactly why I was so intrigued by Nira Skin and its focus on skin rejuvenation through laser technology, which already sets it apart from the usual wave of skincare gadgets. I’ve been testing the Nira Pro Laser (2nd Gen) – even though a newer model has since launched and is next on my list – but before diving into my results, it’s worth taking a closer look at what makes this device different.

Price and availability

The Nira Pro Laser (2nd Gen) costs £539/$599 for the device alone, or £584/$649 as part of a skincare bundle that includes a hyaluronic acid serum and peptide cream.

It’s available directly from Nira Skin’s website, and at the time of writing, it’s discounted due to the newer model launching.

Nira Pro Laser (2nd Gen) : was £539 now £337 at niraskin.com

Due to the arrival of the new model, grab the Pro Laser (2nd Gen) for £202 less whilst stock lasts.

View Deal

Design and features

As mentioned, the Pro Laser (2nd Gen) is an at-home laser device designed to target wrinkles and kickstart collagen production in just a couple of minutes a day. It uses non-fractional laser technology to trigger your skin’s natural healing response, helping remodel existing collagen whilst encouraging new production over time.

You get five power levels to tailor the intensity depending on your skin sensitivity, and compared to earlier models, it has a larger contact area, meaning you can cover more area in less time. It also only weighs around 140g, which makes it easier to use and hold throughout treatment.

I’ve been testing the laser with the skincare bundle, which includes a Moisture-Lock Hyaluronic Acid Serum (50ml) and Youth Renewal Peptide Cream (80ml), both of which are designed to boost results. The acid serum acts as an advanced hydration multiplier, formulated with a 1.1% concentration of HA, whilst the peptide cream is a deeply nourishing formula with a clinically proven multi-peptide complex.

It charges via USB-C, taking around three hours for a full charge and delivering roughly 20-25 minutes of treatment time, depending on how often you use it.

Why is it more effective than an LED face mask?

The Nira Pro Laser (2nd Gen) utilises a non-fractional 1450nm wavelength laser that penetrates deep into the dermis, where it heats fibroblasts and stimulates collagen production.

This is what makes the Pro Laser significantly more powerful than a traditional LED face mask, which typically operates in the 600–1000nm range and doesn't reach as deeply. Whilst LED light can be great for surface-level improvements and supporting cellular activity, its collagen-boosting effects tend to be less consistent compared to the deeper results achieved with Nira.

Performance

Now, I’m 26 (nearly 27), which puts me in a slightly unusual position for testing anti-ageing devices. I’m not dealing with deep-set wrinkles yet, but I am starting to notice early signs, including fine lines around my eyes and slight creasing when I smile. That actually makes it easier to track subtle changes, and see what’s actually working and what isn't.

After nearly two months of use, I can confidently say this device has changed my perspective. I’ve relied on LED masks for years to keep my skin clear, but when it comes to tackling early signs of ageing, the Nira Pro Laser feels like a step up.

I’ve been using the Nira Pro Laser (2nd Gen) once a day, even though the brand says you can use it twice. I tend to reach for it after cleansing and before applying my skincare, taking a minute or so to run it over my focus areas – mainly around my eyes and along my lower cheeks.

The first thing that stood out to me is just how quick it is. I know I’m not treating my entire face and neck, but it only takes me around a minute each evening. That’s a big shift from the 10-12 minutes I’d usually spend using an LED face mask, and you’re not lying there half-blinded either.

Nira recommends starting low and gradually increasing until you feel the heat, and I found level four worked best for me. Levels one and two were so gentle I could barely feel anything at all, but the top level was too much, especially around more delicate areas like the eyes. That said, if you prefer a completely sensation-free experience, those lower levels are there, though it might take a bit longer to see results.

The feeling itself is completely painless. It’s a quick burst of warmth and quite similar to the sensation you get from an IPL devices, and it’s over in a flash. It does make me wonder what happens once you get used to the highest level, as there’s nowhere further to go, but I believe that’s something the newer model has addressed.

When it comes to results, I first started noticing changes around week six, particularly around my eyes. I had a couple of fairly noticeable crow’s feet that had developed over the past six months, and I was really curious to see if I could soften them. They haven’t disappeared entirely but they’ve faded significantly, and I have to properly look for them now instead of them catching my eye straight away.

I also focused on a faint line in the middle of my forehead and the creasing in my cheeks when I smile. Both have softened over time, which has made a visible difference overall. It’s definitely one of those devices where consistency is key – you won’t see much in the first few weeks, but stick with it and the results do come. I also found it lasted around 1.5 to 2 weeks on a full charge, which felt reasonable. It takes about three hours to fully recharge, so nothing particularly fast, but nothing frustrating either.

One small detail I really liked is how intuitive it is to use. The device makes a little jingle every 10 pulses to prompt you to move to a new area, and it gives a longer beep if you’re not making proper contact with your skin. It’s touches like these that make the whole experience feel more guided and ensure you’re using it properly without having to think too much about it.

Verdict

The Nira Pro Laser (2nd Gen) proves that at-home skincare devices can go beyond surface-level results. It’s quick, easy to use, and delivers visible improvements if you’re consistent. If you’re serious about tackling signs of ageing and want something that fits effortlessly into your routine, it’s absolutely worth a purchase.

Alternatives to consider

There’s nothing quite like the Nira Pro Laser (2nd Gen) at this level, aside from the newer third-gen model which has only just launched. As mentioned, I’m currently testing that one next, so I’ll share my thoughts in due course.

Another product I still recommend is an LED face mask. Even though the Nira Pro Laser has completely won me over when it comes to wrinkle care, I’d still point you towards the Shark CryoGlow. It’s my favourite mask I’ve tried, and its treatment times are noticeably shorter than many other models out there.