This luxury electric car charger changed the way I drive an EV – and it’s by far the classiest design on the market
The limited-edition English Heritage Andersen A3 Charge Point is the connoisseur's choice of EV chargers
Andersen’s A3 charge point is its most stylish charger to date, with the largest choice of customisation including the new English Heritage fascias. With a hidden cable and a convenient light, it keeps the device looking neat and easy to connect to, even at night.
-
+
Lots of customisation options
-
+
Hidden tethered cable
-
+
Light for nighttime operation
-
-
Only available in 7kW (single-phase)
-
-
No display
Why you can trust T3
My advice to anyone is that if you are buying an electric car, you need a home wall charger. Not only does it allow for easier charging, but it changes your whole EV experience. If you want the best, one model worth looking at is the Andersen A3. Not only is this a very capable charger, but it looks fantastic. I’ve been using the Andersen A3 for a couple of months now, and it ticks all my boxes.
The magic of an electric car is that you can essentially charge it wherever there’s a plug. For years, that’s how I’ve charged most often. Simple portable adapters often come with the cars, or are available relatively cheaply online, and plug into a regular three-pin socket. However, this method is very slow, so even overnight charging isn’t enough. So while these are handy to keep in your car for emergencies, they’re not the most efficient way to charge.
One key factor of EV charging is the speed at which it can deliver the charge. This is typically measured in kW and will determine how long it takes to charge your car’s battery. The overall speed is determined by both the car and the charger. Home charging is generally referred to as AC charging, as this uses alternating current (AC), while public fast charging uses direct current (DC).
For fast charging, public chargers generally have a maximum output of between 100kW and 350kW. Similarly, most electric cars have a limit for DC charging that can range from 100kW to over 400kW. Your charging speed is limited by whichever is the lower number – so if your EV has a maximum DC charge of 100 kW, you can only ever charge at up to 100kW, even on a 250kW charger.
For home charging, things are a little simpler. Most modern electric cars have a maximum AC charging rate of either 11kW or 22kW, and most home chargers are either 7.2kW or 22kW. A 22kW charger requires a three-phase power supply, which is rarely available in domestic properties. Most 22kW chargers are found in business environments that have had special power supplies installed.
That means that for most homes, a 7.2 kW charger is the best option. For most cars, that means a charge time of around 6-8 hours from empty. That’s a simple overnight charge, and in most cases you won’t be charging from empty, so the time will be significantly less. By contrast, a portable EV charger will typically charge at 2-3kW, so charge times are between 12-15 hours for a similar refill.
Andersen’s offerings
Andersen is a British company that has been making high-end home charging points since 2022. Based in Bedfordshire, it offers four models with a selection of 7kW and 22kW compatibility. The Andersen Quartz Vision is the company’s only model to feature a digital display, while the A3 is arguably the best-looking.
Get all the latest news, reviews, deals and buying guides on gorgeous tech, home and active products from the T3 experts
Like the larger A2, the A3 features a flat design with a front metal panel that can be customised in a choice of 13 colours. You can also choose to have one of four wood finishes, or one of the limited edition finishes. These include a Carbon look, a custom palette and two English Heritage designs.
The English Heritage collection is inspired by real heritage locations, including Wrest Park in Bedfordshire and Eltham Palace in London. The result is fascias crafted from Accoya wood, the Wrest Redwood and the Eltham Brown, both featuring an English Heritage logo in the bottom left corner.
The Andersen A3 starts from £995 on the Andersen website, with an extra £300 for the English Heritage fascia. Installation starts from £435, with a remote survey and a 7-year warranty. Alternatively, the premium install includes an in-person home survey with advice on customisations and location choice.
Survey and installation
I opted for a standard installation, as I knew the model I wanted and where I wanted the unit installed. The redwood finish matched the colour of my window frames and door, so I was asked to submit photos and videos of where I wanted the device and of my fuse box.
The charge point arrived in advance of my installation date, so when the engineer arrived, I simply handed him the box, and he set about installing it. In just a few hours, the Andersen A3 was neatly installed on the outer wall of my house. Thanks to the positioning, there were no unsightly wires going to or from the box, so it sat pristine on the wall.
Key features of the Andersen A3
The A3 features a 5.5 metre tethered cable, neatly hidden within the box, so you don’t need to plug anything into it. The front fascia is slightly raised from the main body of the charger, allowing you to wind the cable tightly inside the unit so that it remains hidden when not in use. The CCS port, which plugs into the car, sits in a holder in the top area, below a flap.
When the flap is open, a light shows, helping you to see what you’re doing. The A3 is the only model to feature convenience lighting, and it’s one of the reasons I picked this model. This model isn’t compatible with three-phase systems for faster 22kW charging, but that wasn’t an issue for me. Like the other models, though, it is compatible with a solar energy system if you have one installed.
App control
There is an Andersen app that allows you to control your A3 charger. It gives you live information about your charging and the amount of power you’re using, as well as historical data on previous charges. This includes how long you charged for, the amount of power used and an estimate of cost. If you have a dedicated EV tariff you can input that information into the app for more accurate data.
You need to use the app to set up the charger and link it to your WiFi network. You can also use it to share your charger with others or to lock the charger to prevent anyone else from using it, which could be handy if installed in a shared area.
In practice, once set up, I didn’t find the need to access the app very often. Most EVs have their own app for charging, which provides all the info you need. However, the app is handy as a backup or to check on usage.
Should I buy an Andersen A3 EV charger?
If you need a luxury charger to match your car and home, the Andersen A3 is an easy choice. It’s a great-looking charging point that keeps your cable neatly hidden when not in use and makes plugging in to charge quick and easy, with a handy light on dark evenings.
The best thing about this unit is the customisation, allowing you to pick from a wide range of colours and finishes for the front fascia and the main body colour to match your style. If you need a longer cable or a 22kW connection, you might be better with the A2 model, but for most people the A3 is the best choice.
As T3's Editor-in-Chief, Mat Gallagher has his finger on the pulse for the latest advances in technology. He has written about technology since 2003 and after stints in Beijing, Hong Kong and Chicago is now based in the UK. He’s a true lover of gadgets, but especially anything that involves cameras, Apple, electric cars, musical instruments or travel.
You must confirm your public display name before commenting
Please logout and then login again, you will then be prompted to enter your display name.